Torque
6.3 ft-lb
Refer to
manufacturers
suggested
Torque values
on pg. 2.
Installation Manual | Fixed System
Assembly - Stinger Unit
EkoStinger|140 Despatch Dr, East Rochester, NY 14445|855.833.7940|[email protected]
pg.
12
5
Attaching Bottom Support Angle
5
Fixed Support Hardware Bag
Attach the Bottom Support Angle (10093F) by installing 3x Eyehooks (EYE-H)
from the top and 4x Hex bolts (20085) from the bottom. Secure each
Eyehook and Hex bolt using a washer (20044) and a Locknut (20006).
Eyehook
EYE-H
(3x)
Cable
FX-CBL
(2x)
No Cable
Locknut
20006
(7x)
Note: Two of the Eye Hooks come with cables pre-
attached. These need to be installed on the sides.
The center EyeHook is not attached to a cable.
Washer
20044
(7x)
Hex bolt
20085
(4x)
