DK50 9x4VRT/M
10/2018
NP-DK50-9x4VRTM_ED-EN-2_10-2018
- 23-
ETHERNET NETWORK CONNECTION
The compressor may be connected to an
Ethernet 10/100 M network via the controller
as follows:
1. Use the RJ-45 connector on the
switchboard door to connect a cable to
the Ethernet network.
2. The user shall then request IT staff to
connect the compressor to the
user’s
Ethernet network. The equipment’s
default
IP
addresses
are:
BM=192.168.0.3,
TDE=192.168.0.2,
sub-mask =255.255.255.0.
or
3. The
user
shall
request
the
configuration of IP addresses (specific
or requested) from the manufacturer
before the compressor is shipped, or
configure the IP addresses (specific or
requested) based on the manual (see
the service manual) or via the
compressor manufacturer’s technical
support for such purposes.
Web server
The controller has an integrated Web Server
function that facilitates compressor monitoring
via a PC, smartphone or tablet using a
conventional web browser (Mozilla, Opera,
Safari, Google Chrome, etc /
The process for logging into the Web Server
function once the compressor is connected to
an Ethernet network is as follows:
Open the web browser on a PC, smartphone
or tablet and enter the IP address of the
controller basic module
192.168.0.3
Fig.16
Fig.17
Summary of Contents for DK50 9x4VRT/M
