EKOM DK50 9x4VRT/M, User Manual

Page: 13 / 45

DK50 9x4VRT/M
10/2018 NP-DK50-9x4VRTM_ED-EN-2_10-2018
- 13-
8.2. Accessories
Accessories are available for compressor
directly from the manufacturer (by special
request in an order) or may be ordered
directly from the manufacturer at a later time,
see below. Individual accessories may be
combined.
Accessories not included in the standard
order must be ordered separately!
8.2.1. Central air pump intake kit
This kit provides a properly sized central filter
located on the compressor module with intake
ducts to the individual compressors. This
extends the central filter replacement interval
(now every 2,000 hours) and eliminates the
need to replace filters on individual
compressors with simple and fast replacement
of the central filter.
8.2.2. Set of compressed air outlet filters
The compressor may be equipped with a set
of filters if needed. A pressure regulator may
be added to the set of filters. The set of filters
is fully compatible with all compressors listed
above. If a higher level of air filtration is
required, this specification must be
agreed upon with the supplier and
made clear in the order.
SET OF
FILTERS
Level of filtration Pressure regulator Kit article no.
3µm
yes
447000001-058
3µm – 0.3µm 447000001-060
3µm – 0.01µm 447000001-062
1µm – AC/HC 447000001-064
3µm – 0.3µm
no
447000001-061
3µm – 0.01µm 447000001-063
1µm – AC/HC 447000001-065
8.2.3. Compressor module enclosure (soundproofing)
Enclosing the compressor module reduces the
noise generated by the compressor by up to
11 dB(a) compared to the existing module while ensuring sufficient cooling for the air
pumps themselves for S1 class continuous
operations.
Compressor type With central intake Kit article no.
DK50 9x4VRT/M yes 447000001-068
DK50 9x4VRT/M no 447000001-069
Compressor type Kit article no.
DK50 9x4VRT/M 447000001-067
DK50 9x4VRTS/M 447000001-066