EKOM DK50 2V/50/M, User Manual

Page: 9 / 220

GENERAL INFORMATION
03/2022 9 NP-DK50 2V 50, 2x2V 110-AD-A-1_03-2022
5. STORAGE AND TRANSPORT CINDITIONS
The compressor is shipped from the manufacturer in transport packaging. This protects the
product from damage during transport.
Potential for damage to pneumatic components.
The compressor must be transported only when all air has been vented. Before
moving or transporting the compressor, release all the air pressure from the tank
and pressure hoses, from dryer chambers and drain condensate from the tank
and from the condensate separator on the dryer.
Keep the original factory packaging in case the device needs to be returned Use
the original factory packaging during transport as it provides optimum protection
for the product. . If it is necessary to return the product during the warranty
period, the manufacturer is not liable for damages caused by improper
packaging.
The compressor is shipped in a vertical position and must be secured using
transport straps.
Protect the compressor from humid and dirty environments and extreme temperatures
during transport and storage. Do not store near any volatile chemical substances.
If not, please dispose of the original packaging material in an environmentally-friendly
way. The packaging cardboard can be recycled with old paper.
5.1. Ambient conditions
Products may only be stored and transported in vehicles that are free of any traces of volatile
chemicals under the following climactic conditions:
Temperature
–25°C to +55°C, 24 h at up to +70°C
Relative humidity max. 90% (non-condensing)
Storing or shipping the equipment in any conditions other than those specified below is
prohibited.