EKOM AD2250, User Manual

Page: 24 / 92

INSTALLATION
NP_AD500-2250-1_01_2020 -24- 01/2020

Click on the “LOGO! BM” function in the
browser to display the current virtual status
of the display screen. Navigate through the
screen using the ESC and cursor keys in the
same way as on the real display.
16.2. Monitoring memory variables
The “LOGO! Variable” function is the second option for monitoring dryer parameters using selected
memory
variables. Click the “LOGO! Variable” button on the display to bring up the screen and then
use the “AddVariable” button to select specific memory variables for monitoring based on the
mapping provided by the manufacturer.
Variables assignment based on addresses and types may be viewed in the MAPPING
PARAMETERS table.
Select the variable parameters (per the annex) sequentially in the Range, Address, Type
and Display Format columns. Variable values are shown in the Value column. The monitoring table
may then appear as follows:
Note:
Time values are displayed in minutes. For instance, address 10 displays 120000 in minutes, which
is 2,000 hours.
Analogue values (dew point) are displayed without decimal places.
16.3. Logging out from the Web Server

Click on the
“Log off” button in the upper left
corner.