FUEL BED LAYOUT
(continued)
5. Place the pebble ‘D’ onto the peg ‘D’
on the matrix as shown. When pebble ‘C’
is in position this pebble can only fit onto
the peg one way - do not force it on.
6. Place the pebble ‘E’ onto the peg ‘E’ on
the matrix as shown.
7. Place the pebble ‘F’ onto the peg ‘F’ on
the matrix as shown. The pebble should
be orientated so it sits slightly over the
hole in the combustion matrix.
8. Place the pebble ‘G’ onto the peg ‘G’
on the matrix as shown.
9. Place the pebble ‘H’ onto the peg ‘H’
on the matrix as shown.
3
4.0
D
E
F
G
H
©
2009 Focal Point Fires plc.
Summary of Contents for eko 2030
Page 2: ...Eko 2030...
