EKO INSTRUMENTS CO., LTD. VIP Checker HC-121 Instruction Manual V2
Pg. 25
2. Starting Measurement Software
The Measurement Software starts up and the below window is displayed. (The initial Start UP Window is
shown on Figure 6-31)
appears on top of the Main window. Click the Load button to select the
calibration file (*.tcd) created in the Calibration Software, then click OK
window is closed.
If the calibration file is not selected, it will not go forward to the measurement step.
ay will change to the Inspection
Mode, and it shows more detailed contents.
Select a mode which is easy for you to see.
Figure 6-33. Initial Window (At Startup)
Figure 6-34. Initial Window & Mode Menu
Inspection Mode
Normal Mode
