EKO INSTRUMENTS CO., LTD Grating Spectroradiometer MS-713 Instruction Manual Ver5
Pg. 5
3. Safety Information
EKO Products are designed and manufactured with consideration for safety; however, please make
sure to read and understand this instruction manual thoroughly to be able to operate the instrument
safely in the correct manner.
WARNING
CAUTION
Attention to user; pay attention to the instructions given on the
instruction manual with this sign.
HIGH
TEMPERATURE
WARNING
Touching or getting close to the devise may lead to burn.
LOW
TEMPERATURE
WARNING
Touching or getting close to the devise may lead to frostbite.
3 - 1 . WA R N I N G
1. Setup and Operation
Installation base or mast should have enough load capacity to set the Grating Spectroradiometers
MS-713. Fix MS-713 securely to the base or mast with bolts and nuts. Carefully install the
computer as well. The instrument/computer may drop due to gale or earthquake and vibration,
and may invite unexpected accidents.
Do not use this instrument in different use other than its original purpose.
Do not disassemble, modify or touch inside this instrument.
Do not place this instrument in places where humidity and/or dusts exist, extreme difference in
temperature of over specification range, near object which emits strong magnetic energy or electric
wave. These conditions may cause damages to the instrument.
Make sure to install this instrument where maintenance can be performed safely.
Ventilation unit is attached to this instrument. Touching this instrument while the ventilation is
running, it may lead to accidents and injury. Turn off the power before touching the ventilation
unit.
2. Power Supply
Do not touch the terminals and power plug with wet hands. This will lead to electric shocks and
leakages.
Check the voltage and provided power type (AC, DC) to make sure they are suitable for the
instrument specification before turning the power on.
Use only the attached cables. Using any other cables may lead to electric shocks or leakages.
