Ekahau T301W, User Manual

Page: 10 / 36

Warning
Only use channels that really exists in you Wi-Fi network. Activating unnecessary channels will
reduce the tag battery lifetime!
2.3.3 Configuring WLAN Settings
Input the Wi-Fi Network SSID and select the Encryption method used. If WEP 64/128 or WPA2-
PSK is used type in the network key. After WLAN settings are completed the status bar should
show "WLAN Ok"
Figure 2.4. Specifying Wi-Fi network settings
Tip
If WEP encryption is used the Activator automatically determines the key type and length from
what you type. WEP 64 require 5 Ascii characters or 10 hex digits, respectively WEP 128
requires 13 Ascii characters or 26 hex digits.
2.3.4 Configuring IP Settings
Check the IP settings. If DHCP is used nothing needs to be done. In case your network requires
Static IP to be used, type in the IP address range to be used, Netmask and Gateway addresses.
6 Chapter 2. Initial Activation of the Tag