Values
Description
Setting
Free text
A custom note
Custom
List of groups or "No Groups cre-
ated" if no groups exist. Go to
groups page to create groups.
The groups the tag belong to
Member of Groups
Commands
LED; LED and Vibration
Duration: 10s; 1min; 10min; 30min;
1h; 2h
Launches the alarm at the tag with
LEDs only or with vibration and
LEDs. The alarm duration can be
set.
LED / Vibration
-
Manual command or a list of com-
mands can be sent to a tag.
Manual Commands
A list of available configs. Go to
configs page to create tag configur-
ations.
A pre defined config can be selected
and sent to tag(s)
Set Config
Firmware Update
A list of available firmware updates
uploaded in ERC. The firmware
needs first to be uploaded into ERC,
this is done in configs page.
Tag firmware can be updated. The
new firmware needs to be first
uploaded in the configs page
Firmware
Create New Group
Free text
New group is created and the tag is
included into this created group.
Group Name
Manual IP Settings
IP Address
Sets the tag IP Address
Manual IP address
IP Address
Sets the tag netmask
Netmask
IP Address
Sets the default gateway for the tag
Gateway
Delete
-
The tag is deleted from the system.
All statistics are cleared. The tag will
appear in the system again when it
report it's location next time.
Delete
Note
Currently the T301W's vibration is controlled and configured by using the same commands that
are used with the Buzzer. Remember that T301W tag does not have a buzzer alarm!
18
Chapter 3. Configuration After Initial
Activation
Summary of Contents for T301W
