Ekahau T301W, User Manual

Page: 21 / 36

Values (Default underlined) Description Setting
1 - 10 Number of scans the tag does on
each triggered scan despite the
triggering event. Used to improve
the accuracy in difficult conditions
and for rarely scanning applications. Initial Scan Count
No Delay; 250ms; 500ms; 1000ms;
1500ms; 2000ms Delay between the scans. Delay between initial scans
0 - 10 The number of scans the tag per-
forms for each after motion event. After Motion Scan Count
0 - 10 The number of scans the tag per-
forms for each button event. Button Scan Count
Battery Lifetime Estimation (Optional)
Movement occasions per Hour, Day Estimated frequency of movement
occasions with the defined configur-
ation. This is relevant only when
Motion Sensor is enabled. Other-
wise leave the field empty. Movement Frequency of Tags
Average movement duration in
Seconds, Minutes, Hours Estimated average duration of a
single movement occasion. This is
relevenat only when Motion Sensor
is enabled. Otherwise leave the field
empty. Average Movement Duration
Note
1) Network wide DHCP enables roaming between subnetworks. With this setting the tag refreshes
its IP address whenever the tag associates with a new access point. It is not recommended to
use the feature, if not required, due to higher power consumption
Note
2) Using the Advanced Scan Settings need a careful consideration. The scanning consumes
a high amount of energy, and the more scanning is done the less battery life the tag has. Typ-
ically these parameters are used to improve accuracy in very difficult conditions or in cases the
tag otherwise would scan rarely.
3.2 Tag Actions Available in ERC Tags Properties Page
Values Description Setting
User Data
Free text A user given name for tag Name
Chapter 3. Configuration After Initial
Activation
17