EINHELL WZDS 75 K User Manual Download Page 40

Page: 40 / 50

AFTER SALES SUPPORT

www.einhell.co.uk

Maintenance and servicing

75W DETAIL SANDER – WZDS 75 K

0151 649 1500

1890 94 62 44

Transport

CAUTION!

Always set the On/Off button switch

to Stop (0) &

disconnect the 13A plug from the mains supply, before

transporting the detail sander! (See Fig. 1). Risk of electric

shock or injury.

When the 13A plug is disconnected gather the mains cable together and relocate the

detail sander to the new location before reconnecting the 13A plug to the power supply.

CAUTION!

Ensure that the 13A plug is clear of the ground and does

not drag along the ground or surfaces, during relocation

or transport. Risk of electric shock or fire if the 13A plug is

damaged.

Environmental protection

Dispose of soiled maintenance material and operating materials at the appropriate

collection point. Recycle packaging material, metal and plastics.

Ordering replacement parts

Please quote the following data when ordering replacement parts:

-  Type of machine (WZDS 75 K)
-  Article number of the machine (4460595)
-  Identification number of the machine (11016)
-  Replacement part number or description of the part required
-   Optional pack sanding sheets – Not supplied

(446059501800 - 6 piece pack. 2x 80 G, 3x 120 G, 1x 180 G. Sheet size - 132 x 132 x 93 mm)

- Optional pack finger sanding pieces – Not supplied

(446059501801 - 10 piece pack. 10x 180 G. Sheet size - 31.5 x 92 mm)

For our latest prices and information please go to www.einhell.co.uk

77014_4460595_11016_UG.indd 46

18/04/2017 1:18 pm

Summary of Contents for WZDS 75 K



















































Search results

Summary of Contents for WZDS 75 K

Reviews:

Related manuals for WZDS 75 K

Brands by name

Popular brands

EINHELL WZDS 75 K, User Manual

Search results

Summary of Contents for WZDS 75 K

Reviews:

Related manuals for WZDS 75 K

Brands by name

Popular brands