AFTER SALES SUPPORT
0151 649 1500
1890 94 62 44
www.einhell.co.uk
41
Cleaning
75W DETAIL SANDER – WZDS 75 K
Clean your electric tool carefully. Check whether moving parts are functioning
properly and not jamming, whether parts are broken or damaged enough that the
functioning of this electric tool is affected. Have damaged parts repaired before
using the appliance. Many accidents are caused by badly maintained electric tools.
CAUTION!
Prevent water getting inside the motor unit of the detail
sander at all cost. Risk of electric shock.
Emptying the dust collection box and cleaning the fi lter on the underside of the
top of the dust collection box (See Fig. 19a – Fig. 19b)
-
Switch OFF the detail sander, and unplug the 13A plug & cable
12
from the mains
supply. Then remove the dust collection box
3
from the rear of the detail sander
body, and remove the dust into a dustbin or waste container. (See Fig. 19). A vacuum
cleaner can also be used to extract the dust from the mouth of the dust collection
box.
-
Open the dust collection box
3
& then clean the fi lter
f
in the top part of the box
3
, by using a vacuum cleaner, or place the top part of the box
3
(and fi lter
f
)
over a waste bin and tap the dust into the bin, or use a hard bristled brush (like a dry
toothbrush) on the inside of the fi lter
f
, to remove any dust from the fi lter
f
into
the bin.
Fig. 19b
3
3
f
Fig. 19a
3
77014_4460595_11016_UG.indd 43
18/04/2017 1:18 pm
