AFTER SALES SUPPORT
0151 649 1500
1890 94 62 44
www.einhell.co.uk
27
Safety
75W DETAIL SANDER – WZDS 75 K
waste container. (See Fig. 8). A vacuum cleaner can also be used to
extract the dust from the mouth of the dust collection box.
9. Residual risks
Despite being used properly, certain residual risk factors cannot be
completely ruled out. The following risks associated with the design
and construction of the detail sander may apply:
- Damage to hearing if no suitable ear protection is used.
- Inhaling of work material particles or dust. (Danger of poisoning or
lung damage).
- Health damage caused by hand-arm vibrations if the equipment is
used over a prolonged period or is not properly guided during use
or not maintained properly.
- Only the correct dust collection box
3
with the integral filter
f
fitted on the inside top of the dust collection box must be fitted to
the detail sander (See Fig. 7a on page 25). The filter must be in a
good condition, with no holes in the material.
10. Safety and protective equipment
- There is an internal filter
f
fitted inside the top of the dust
collection box
3
(See Fig. 9a item
f
on page 28), to reduce
the amount of fine dust generated by the detail sander in the
atmosphere of the working area.
- There are holes
h
in the base of the detail sander oscillator plate
4
which provide dust extraction from the working surface, into
the collection box
3
when a correct grinding/sanding sheet is
fitted, with corresponding holes through the sheet. (The best dust
extraction will occur when the holes in the grinding/sanding sheet
5
are aligned correctly with the holes in the oscillating plate
4
(See Fig. 9b on page 28).
77014_4460595_11016_UG.indd 29
18/04/2017 1:17 pm
