EINHELL WZDS 75 K User Manual Download Page 35

Page: 35 / 50

AFTER SALES SUPPORT

0151 649 1500

1890 94 62 44

www.einhell.co.uk

Use

75W DETAIL SANDER – WZDS 75 K

NOTICE!

- Be sure to observe the safety instructions (see pages 10 - 28).

Malfunction and remedy (FAQ)

Problem

Problem Cause

Corrective Action

The detail

sander does

not work

No power at the plug.

Check the power at the

plug cable and fuse.

Detail Sander is switched off.

Switch the detail sander on.

Grinding/

sanding

performance

unsatisfactory

The dust collection box

may be

full, or the filter fitted on the inside

top of the dust collection box could

be blocked.

Remove the dust collection box

and empty it, and/or clean the filter

fitted on the inside top of the dust

collection box

The grinding/sanding sheet

rust-removing pad

, polishing

pad

or the sander finger

piece may be worn.

Remove the existing grinding/

sanding sheet

, rust-removing

pad

, polishing pad

or the

sander finger piece

and replace

with a new one.

77014_4460595_11016_UG.indd 41

18/04/2017 1:18 pm

Summary of Contents for WZDS 75 K



















































Search results

Summary of Contents for WZDS 75 K

Reviews:

Related manuals for WZDS 75 K

Brands by name

Popular brands

EINHELL WZDS 75 K, User Manual

Search results

Summary of Contents for WZDS 75 K

Reviews:

Related manuals for WZDS 75 K

Brands by name

Popular brands