AFTER SALES SUPPORT
0151 649 1500
1890 94 62 44
www.einhell.co.uk
37
Use
75W DETAIL SANDER – WZDS 75 K
Fig. 17
Fig. 16
8
3. Working with the grinding/sanding sheets fi tted (See Fig. 17)
-
Large areas: Ensure that the whole of the sheet is on the work surface.
- Switch the detail sander ON and move it with a gentle pressure over the work surface
using completely circular movements, or moving it to and fro and up and down.
Switch OFF after use.
-
Detail work: ensure that as much as possible of the sheet is on the work surface.
- Switch the detail sander ON and move it with a gentle pressure over the work surface
moving it to and fro or up and down. Using the delta shape of the sheet rotate the detail
sander to get the best position into the shape of the work surface. Switch OFF after use.
- Use a coarse paper for
coarse sanding and a fi ne paper for fi nish sanding. Test the
grinding/sanding sheets to determine which is the most suitable on the material of the
work piece.
4. Working with the rust-removing pad fi tted (See Fig. 17)
-
Large areas: Ensure that the whole of the pad is on the work surface.
- Switch the detail sander ON and move it with a gentle pressure over the work surface
using completely circular movements, or moving it to and fro and up and down.
Switch OFF after use.
-
Detail work: ensure that as much as possible of the pad is on the work surface.
- Switch the detail sander ON and move it with a gentle pressure over the work surface
moving it to and fro or up and down. Using the delta shape of the pad rotate the detail
sander to get the best position into the shape of the work surface. Switch OFF after use.
77014_4460595_11016_UG.indd 39
18/04/2017 1:18 pm
