EINHELL GE-SA 1640, Original Operating Instructions, Page: 21 / 108

GB
- 21 -
3. Proper use
The equipment can be used both as a scari Þ er
and an aerator depending on the intended use.
Only a few movements are required to change
the roller.
The scarifying roller is designed for ripping moss
and weeds - complete with their roots - out of the
soil and for loosening the soil. As a result your
lawn can absorb nutrients better and is cleaned.
We recommend you to scarify your lawn in the
spring (April) and autumn (October).
The aerating roller scratches the surface of the
lawn, helping water to drain o
Ů
more easily as
well as promoting oxygen intake. Aerate your lawn
throughout the growing period.
The equipment is intended for private use i.e. for
use in home and gardening environments.
Scari
Þ
ers for private use are machines whose an-
nual operating time generally does not exceed 10
hours, during which the machine is primarily used
to maintain small-scale, residential lawns and
home/hobby gardens. Public facilities, sporting
halls, and agricultural/forestry applications are
excluded.
The operating instructions as supplied by the ma-
nufacturer must be kept and referred to in order
to ensure that the equipment is properly used
and maintained. The instructions contain valuable
information on operating, maintenance and servi-
cing conditions.
Important! Due to the high risk of bodily injury
to the user, the equipment may not be used to
grind up branch or hedge clippings. Moreover, the
equipment may not be used as a power cultivator
to level out high areas such as mole hills.
For safety reasons, the scari Þ er may not be used
as a drive unit for other equipment or toolkits of
any kind, unless speci
Þ cally advised to do so by
the manufacturer.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Voltage: .......................................... 230 V ~ 50 Hz
Power consumption: ................................. 1600 W
Idle speed: .............................................2600/min
Working width: ............................................40 cm
Number of blades:................................. 20 pieces
Number of claws: ............................................. 30
Scarifying depth: ................... - 3 / 3 / 6 / 9 /12 mm
L
pA
sound pressure level: ..................... 76.6 dB(A)
L
WA
sound power level: ........................... 98 dB(A)
K uncertainty: ........................................... 2 dB(A)
Vibration on the shaft: ......................... 3.456 m/s
2
K uncertainty: ...........................................1.5 m/s 2
Protection class: .......................................... II /
Protection type: ........................................... IPX4
Weight: ......................................................13.7 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN ISO 3744: 1995,
EN ISO 11201: 1995, EN 1033:1995.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Anl_GE_SA_1640_SPK7.indb 21 16.02.2017 09:37:30