EiKO Global | 18000 W. 105th St, Olathe, KS 66061 | (P) 1-800-852-2217
EiKO Canada | 81 King St, Barrie, Ontario L4N 6B5 | (P) 1-705-721-5189
eiko.com
RESET MODE:
• THE COMMISSIONING TOOL HAS 4 SCENE MODES WHICH ARE NOT DEFAULT. YOU MAY CREATE DESIRED
PARAMETERS AND SAVE AS THE NEW MODE (1,2,3,4) TO CONFIGURE THE INSTALLED SENSORS.
• RESET: ALL SETTINGS GO BACK TO SETTINGS OF DIP SWITCH IN SENSOR.
• SCENE MODES (1, 2, 3, 4):
APPLICATION SCENE OPTIONS BRIGHTNESS DETECTION AREA HOLD TIME
STAND-BY
TIME
STAND-
BY DIM
LEVEL
DAYLIGHT SENSOR
INDOOR
INDOOR
INDOOR
OUTDOOR
MODE
MODE
MODE
MODE
UPLOAD AND DUPLICATE PARAMETERS TO SENSOR(S):
• THE UPLOAD FUNCTION ALLOWS YOU TO CONFIGURE THE SENSOR WITH ALL PARAMETERS IN ONE
OPERATION. YOU MAY SELECT CURRENT SETTING PARAMETERS OR THE MODE FOR UPLOADING. CURRENT
SETTING PARAMETERS OR THE MODE ARE DISPLAYED IN COMISSIONING TOOL.
• UPLOAD THE CURRENT PARAMETERS TO SENSOR(S), AND DUPLICATE THE SENSOR PARAMETERS FROM ONE TO
ANOTHER.
1. PRESS BUTTON OR PRESS , ALL PARAMETERS ARE DISPLAYED IN COMISSIONING
TOOL.
2. AIM AT THE SENSOR AND PRESS BUTTON. THE LIGHT THAT SENSOR CONNECTS WILL FLASH ON/OFF AS
CONFIRMATION
• NOTE: IF OTHER SENSORS NEED THE SAME PARAMETERS, JUST AIM COMISSIONING TOOL AT THE SENSOR AND
REPEAT STEP 2.
