COMMISSIONING TOOL SETTINGS:
1. PRESS BUTTON, THE REMOTE CONTROL LEDS WILL SHOW THE LATEST PARAMETERS YOU SET.
• NOTE: IF YOU PUSH BUTTON BEFORE, YOU MUST PUSH BUTTON TO UNLOCK THE SENSOR.
2. PRESS OR ENTER IN THE SETTING CONDITION, THE PARAMETER LEDS OF REMOTE CONTROL WILL
FLASH TO BE SELECTED, NAVIGATE TO THE DESIRED SETTING BY PRESSING TO SELECT THE NEW
PARAMETERS.
3. PRESS OK TO CONFIRM ALL SETTINGS.
4. AIM AT THE TARGET SENSOR AND PRESS TO UPLOAD THE NEW PARAMETER, THE LED LIGHT WHICH THE
SENSOR CONNECTS WILL ON/OFF AS CONFIRM.
• NOTE: THE SETTING WORKS KEY STEP IS BY PRESSING OR , ENTER IN THE SETTING CONDITION.
• NOTE: THE LED LIGHT WHICH THE SENSOR CONNECTS WILL FLASH ON/OFF AFTER GETTING THE NEW
PARAMETER AS CONFIRMATION.
• NOTE: IF YOU PRESS BUTTON, THE REMOTE LED INDICATORS WILL SHOW THE LATEST PARAMETERS WHICH
WERE SENT.
CHANGE MULTIPLE SETTING OF SENSORS WITH SMART PHOTOCELL SENSOR:
1. PRESS THE REMOTE LED INDICATORS WILL SHOW THE LATEST PARAMETERS.
2. PRESS OR ENTER IN THE SETTING CONDITION, THE PARAMETER LED INDICATORS OF REMOTE CONTROL
WILL FLASH TO BE SELECTED.
3. PRESS , 2 LED INDICATORS WILL FLASH IN DAYLIGHT SENSOR SETTINGS, SELECT DAYLIGHT
AS SETPOINT TO LIGHT ON AUTOMATICALLY, SELECT DAYLIGHT AS SETPOINT TO LIGHT OFF
AUTOMATICALLY.
4. PRESS TO CONFIRM ALL SETTING AND SAVING.
5. AIM AT THE TARGET SENSOR AND PRESS TO UPLOAD THE NEW PARAMETER. THE LED LIGHT WHICH THE
SENSOR CONNECTS WILL ON/OFF.
• NOTE: IS DISABLED BY DEFAULT.
• TO SET OR REMOVE THE SMART DAYLIGHT FUNCTION, PRESS WHEN REMOTE CONTROL IS IN SETTING
MODE.
• WHEN THE SMART DAYLIGHT FUNCTION IS ACTIVED, 2 LED INDICATORS WILL FLASH IN THE DAYLIGHT SENSOR
SETTING. SELECT DAYLIGHT AS SETPOINT FOR LIGHT TO SET AUTOMATICALLY, SELECT DAYLIGHT
AS SETPOINT TO TURN LIGHT OFF AUTOMATICALLY.WHEN SMART DAYLIGHT SENSOR CLOSE, LED
INDICATOR WILL FLASH IN THE DAYLIGHT SENSOR SETTING FOR CHOOSE DAYLIGHT SENSOR THRESHOLD.
• WHEN THE SMART DAYLIGHT SENSOR OPEN, THE STAND-BY TIME IS ONLY
• SMART DAYLIGHT SENSOR TAKES PLACE OF NORMAL PHOTOCELL SENOR AND WORKS INDEPENDENTLY.
• SEE DAYLIGHT SENSOR FUNCTION.
CORRIDOR FUNCTION:
• WITH SUFFCIENT
NATURAL LIGHT,
THE LIGHT DOES
NOT SWITCH ON
WHEN PRESENCE IS
DETECTED.
• THIS FUNCTION INSIDE THE MOTION SENSOR TO ACHIEVE TRI-LEVEL CONTROL, FOR SOME AREAS WHICH
REQUIRE A LIGHT CHANGE NOTICE BEFORE SWITCH-OFF. THE SENSOR OFFERS 3 LEVELS OF LIGHT: 100%
DIMMED LIGHT (NATURAL LIGHT IS INSUFFICIENT, OFF, AND 2 PERIODS OF SELECTABLE WAITING TIME:
MOTION HOLD-LIME AND STAND-BY PERIOD, SELECTABLE DAYLIGHT THRESHOLD AND FREEDOM OF
DETECTION AREA.
• WITH INSUFFICIENT
NATURAL LIGHT, THE
SENSOR SWITCHES
ON THE LIGHT
AUTOMATICALLY
WHEN PRESENCE IS
DETECTED.
• AFTER HOLD-TIME,
THE LIGHT DIMS TO
STAND-BY LEVEL IF
THE SURROUNDING
NATURAL LIGHT IS
BELOW THE DAYLIGHT
THRESHOLD.
• LIGHT SWITCHES OFF
AUTOMATICALLY AFTER
THE STAND-BY PERIOD
ELAPSES.
