Eiki PjNET-50, Owner'S Manual

Page: 64 / 124

64
Chapter 4 Controlling the Projector
Register the projector
To use the multi control function, register the IP address of the projector you intend to
control. Click
PJ registration
sub menu tab and set the IP address, Memo and Multi control
item, then click
Set
button.
✐
10 projectors per page can be registered and up to 100 sets can be registered for the multi-
control.
IP address
Page no.
Click here to close
the sub menu Conf.
& Change.
* When you click on a listed IP
address, the login page for the
selected projector will be dis-
played with a new window.
Status
Confirmation of registered projector
To check the registered information, click
Conf. & Change
sub menu tab. The registered information of the projector is
listed as the below.
* The word "none" is displayed if not using the "Memo" func-
tion.
Memo
items Description
IP address .............Enter IP address of the projector to control
Memo ......................Enter projector name or installed location etc.
Multi control item
Control ................Controlling the projector
Both control ............ Controlling and displaying images (XG250/XG300)
Visual control ..........Displaying the images (XG250/XG300)
Control&Image ....... Controlling and displaying images (XG400/SXG400)
Image .......................Displaying the images (XG400/SXG400)
*Item name differs depending on the projector's type.