Eiki PjNET-50, Owner'S Manual, Page: 18 / 124

18
Chapter 2 Installation
Mounting
✐
AC cord must be disconnected when mounting or removing this product otherwise it may dam-
age the product.
✐
Do not install multiple network units into a projector otherwise it may damage the product.
✐
Connect the AC cord after connecting the LAN cable and computer.
[2] installation and network configuration
Caution
!
1
Disconnect the AC plug from the projector.
2
Remove the connector cover and
screw covers (2 pieces) from the
projector and insert plug on this
product to the option connector.
3
Tighten two screws by using a coin
etc.
Connector cover
Screw cover