Eiki PjNET-50, Owner'S Manual

Page: 38 / 124

38
Chapter 3 Basic Setting and Operation
E-mail setting
This product has an E-mail function which can send an alert message
to users or an administrator if it detects an abnormality on the projector
or run out of the life span of the lamp. Click
E-mail Setting on the main
menu and follow the below steps.
item Description
SMTP server*
1
..... Sets server name or IP address of the SMTP server
Administrator
address
...................Sets e-mail address of administrator
Add e-mail
address ................... Sets e-mail address of the user to send mail when
the projector has an abnormality.
1
Setting SMTP server and administrator address
Set the server name or IP address of the SMTP server*
1
and administrator address. The
administrator address is set to "Reply-To" address of the message sent from the projec-
tor.
*1 The SMTP server is a server for sending E-Mail. Please contact your network administrator to
have this SMTP server address.
✐
If the network unit sends an alert message due to the abnormality on the projector but the SMTP
server is down in some other reason, the message will not be sent. In this case, the message
"Unable to connect to server." will be displayed on the setting page. To clear this message, set up
SMTP server address again.
✐
To use the E-Mail function, it must be set the DNS address on the Network setting page correctly.
✐
You cannot use this E-mail function if the DNS server and SMTP server cannot be used in your net-
work environment.
✐
The projector does not send message to the address set in "Administrator address" text box. If you
want to send e-mails to the administrator address, enter the administrator address into "Add e-mail
address" text box.