15
EIGHT
PINS
Attention! In order to avoid injuries, the cable needs to be pulled into the cable clamp hiding any type of cable bits
sticking out of it.
3mm
The distance between cab-
le clamp and cable housing
should still not exceed 3
mm.
Tighten the two screws of
the cable clamp simul-
taneously with a torque
wrench with 5 Nm.
5mm
Hold the Aluminum cable
housing with your hand.
With the other hand, pull
the cable in order to open
the click mechanism.
With this pretension, fi rst
hang the Aluminum cable
housing with the end cap
on the remote lever.
In the last step, the end
cap can be hanged on the
remote lever.
Summary of Contents for NGS2
Page 8: ...8 EIGHTPINS...
