13
EIGHT
PINS
Install the remote lever between the grip and the brake lever and tighten its screw with 2.5 Nm.
Note: The lever can be used with 2-speed drivetrain gear levers and without. Make sure the Eightpins
remote lever does not interfere with the gear lever. Further turn it upwards, in order to avoid this.
Before the cable is attached to it, pull it fi rmly until the click mechanics is fully open. You can hear a slight click from
the inside of the seat tube. When releasing again, you will hear another click. This process is important to confi rm
that all components of the cable system sit tightly.
cable housing
bo
wden cable
cable adjust
er
fle
x aluminium
cable housing
end cap small
clamping nut
Summary of Contents for NGS2
Page 8: ...8 EIGHTPINS...
