36
EIGHT
PINS
Adjusting of the overload clutch
Secure the mounting inter-
face against twisting with a
24mm wrench.
Set the torque to 18Nm
with a torque wrench and a
6mm Allen bit with at least
25mm shaft length. Directi-
on of rotation is clockwise.
Unscrew the valve cap with
a 3 mm Allen key.
Install the valve cap again
and tighten it with 0,5 Nm.
Hint! The tightness of the cartridge cannot be
guaranteed without the valve cap.
Summary of Contents for NGS2
Page 8: ...8 EIGHTPINS...
