31
EIGHT
PINS
Rotate the outer sleeve by rotation so that the mounting hole of the outer sleeve coincides with the mounting hole on
the frame.
Screw the M5 mounting screw of the outer sleeve into the outer sleeve with a 3mm Allen key.
Attention! The screw must be easy to screw into the outer sleeve. If this is not the case, perhaps
the hole in the frame does not coincide with the mounting hole of the outer sleeve. The frame can
be squeezed or damaged
Reassemble the seat post tube by inserting the height adjustment clamp back into the
tube. The two guides of the height adjustment clamp must again engage in the longitu-
dinal guide grooves on the inside of the seat post.
Now carefully move the seat post downwards and insert it carefully into the wiper.
Achtung! Do not allow the seat post tube to collide with the piston rod.
There is a risk of scratches and damage to the piston rod which could
lead to air loss. führen können.
Summary of Contents for NGS2
Page 8: ...8 EIGHTPINS...
