User Manual EickSonic II – ENGL
24/28
5.3
Storage and Maintenance
The equipment should be handled carefully and lightly. Be sure that it is far from the vibration, and is
installed or kept in a cool, dry and ventilated place.
Do not put the machine together with the articles that are combustible poisonous, caustic, or explosive.
This equipment should be reserved in a room where the relative humidity is
≤
80 %, atmospheric
pressure is 50 kPa to 106 kPa and the temperature is -10 °C to +50 °C.
Please turn off the power switch and pull out the power line plug when the equipment is not used. If the
machine is not used for a long time, please make it get through to the power and water once per month
for five minutes.
5.4
Transportation
Excessive impact and shake should be forbidden in transportation. Lay it carefully and lightly and do not
invert it. Do not put it together with dangerous goods. Avoid solarisation and getting wet in rain and
snow during transportation.
6
Declaration of Conformity
6.1
Product conforms to the following Standards
EN 60601-1:2006 EN 60601-1-2:2007
EN 60601-1-6:2010 EN 62366:2008
EN 61205:1994 EN ISO 22374:2005
EN 62304:2006 EN 980:2008
EN ISO 9687:1995 EN 1041:2008
ISO 15223-1-2012 EN ISO 14971:2012
EN ISO 7405:2008 +A1:2003 EN ISO 17664:2004
EN ISO 17665-1:2006 EN ISO 10993-1:2009
EN ISO 10993-5:2009 EN ISO 10993-10:2010
6.2
EMC-Declaration of Conformity
The device has been tested and homologated in accordance with EN 60601-1-2 for EMC. This does not
guarantee in any way that this device will not be affected by electromagnetic interference. Avoid using
the device in high electromagnetic environment.
7
Statement
All rights of modifying the product are reserved to the manufacturer without further notice. The pictures
are only for reference.
Summary of Contents for EICKSONIC II
Page 2: ......
Page 14: ......
Page 26: ...User Manual EickSonic II ENGL 26 28 Notes ...
