User Manual EickSonic II – ENGL
21/28
4
Troubleshooting
Fault
Possible causes
Solutions
The scaling tip does not vibrate
and there is no water flowing
out when stepping on the foot
switch.
The power pipe plug is in loose
contact.
Make the plug insert to the
socket well.
The foot switch is in loose
contact.
Insert the foot switch to its
socket tightly.
The fuse of transformer is
broken.
Contact EICKEMEYER
®
The fuse in the main unit is
broken.
Contact EICKEMEYER
®
The scaling tip does not vibrate
but there is water flowing out
when stepping on the foot
switch.
The tip is in loose contact.
Screw the tip on the handpiece
tightly (picture 4).
The connect plug between the
handpiece and the circuit board
is in loose contact.
Contact EICKEMEYER
®
The scaling tip does not vibrate
but there is water flowing out
when stepping on the foot
switch.
Something is wrong with the
handpiece.
Send it to EICKEMEYER
®
to
repair.
Something is wrong with the
cable.
Contact EICKEMEYER
®
The scaling tip vibrates but
there is no water flowing out
when stepping on the switch.
The water control switch is
turned off.
Turn on the water control
switch [Note 1].
There is impurity in the
solenoid valve.
Contact EICKEMEYER
®
The solenoid valve is abnormal. Percuss the solenoid valve by
some hard things [Note 2].
There is still water flowing out
after the power is off.
There is impurity in the
solenoid valve.
Contact EICKEMEYER
®
The handpiece generates heat.
The water control switch is in
a low grade.
Turn the water control switch
to a higher grade [Note 1].
The amount of spouting water
is too little.
The water control switch is in
a low grade.
Turn the water control switch
to a higher grade [Note 1].
The water pressure is not high
enough.
Make the water pressure
higher.
The water pipe is blocked.
Clean the water line by multi-
function syringe [Note 2].
The vibration of the tip
becomes weak.
The tip has not been screwed
on to the handpiece tightly.
Screw on the tip to the
handpiece tightly (as shown
in picture 4).
Summary of Contents for EICKSONIC II
Page 2: ......
Page 14: ......
Page 26: ...User Manual EickSonic II ENGL 26 28 Notes ...
