background image

300781 • 1/2019 • H.S.

6 of 70

Operating Instruction
High Pressure Cleaner cold water, mobile
Series 3x3

1  User information

1.3 

Terminology

In this manual the terminology listed below is replaced by the relevant 
short terms whenever possible

 

High Pressure Cleaner  
cold water, mobile - Series 3x3 

high pressure cleaner or device

 

Operating Instruction 

 

manual

 

High pressure hose   

 

HP-Hose

If a clear reference to a subject is required in the description parts, the  
terminology „High Pressure Cleaner cold water, mobile - Series 3x3“ is used.

1.4 

Meaning of the emphasis

The emphasis used in this manual have the following meanings: 

WARNING

Warning precedes operating procedures, instructions, etc., which, if not 
strictly observed, could result in personal injury or loss of life. Warning 
precedes also, when device misuse could result in personal injury or loss of 
life.

CAUTION

Caution precedes operating procedures, instructions, etc., which, if not 
strictly observed, could result in damage to the high pressure cleaner.  
Caution precedes also, when device misuse could result in damage to the 
high pressure cleaner.

This symbol indicates additional information.

Summary of Contents for 3x3







































































Reviews: