Ehrgeiz Fusion 2, User Manual

Page: 14 / 32

Operations
→
Software updates
12
Service
Reset Fixture Reset Reset / Cancel* Reset fixture like you do while rebooting
Calibration
Disabled* Choose if you would like the most power out of the device
Enabled Choose if you use different Ehrgeiz devices, so all are the same color
Customt
Red 0-255
Set the maximum level for each
color
Green 0-255
Blue 0-255
White 0-255
W-DMX
installed
No* / Yes
Choose whether a W-DMX Receiver / Transciever is installed or not
(optional accessory)
Factory
Default
Load No*/Yes
Set all settings back to factory default values
e
xcept the “W - DMX installed” Option
Information
Fixture time
Resettable xxx Hours
Take a look at the working hours of the device or
clear the resettable working hours.
Total xxx Hours
Clear Resettable Clear / Cancel
Fixture Temp.
Actual xxx C / F
Take a look at the actual and maximum
Temperature or clear the maximum value.
Notice that device does not go back to default
display view if temperature is shown.
Max xxx C / F
Reset Max
Cancel*/
Confirm
Firmware
version
x.x.x.x Shows the installed firmware version
Serial Number xxxxxxxxxx Shows the Serial Number of this device
Product ID
200161
Fusion 2
Shows the Product ID
Software updates
Your Fusion 2 can be updated via the DMX connection, so no need to open it.
If you experience an issue which could probably be solved by a Firmware Update, please contact your Ehrgeiz Dealer for further
instructions.