Ehrgeiz Fusion 2, User Manual

Page: 3 / 32

Introduction
→
Safety Instructions
1
Introduction
Thank you for your purchase and usage of the Ehrgeiz Fusion 2.
You have chosen a reliable product with outstanding features. The device is easy to use and is made of high quality components.
Every Ehrgeiz Product is checked before shipping to secure you are able to receive a great product without compromise. This is not a
toy. Our ambitious aim is to get you a reliable working tool.
Safety Instructions
In General
In order to maintain the condition and to ensure a safe operation, it is important for all users to follow the safety instructions and
warning notes written in this manual.
Do not operate the fixture with missing or damaged covers, shields or any optical component.
Please consider that unauthorized modifications to the device are forbidden due to safety reasons.
If the device is operated in any way that’s not described in this manual, the product may suffer damage and the guarantee wil l
become void. Furthermore, misuse may lead to dangers like short-circuit, burns, electric shock, burns due to ultraviolet radiation,
lamp explosion, crash, etc.
IP65 protection rating
The fixture is dust tight (first digit 6) and protected against water jets by a nozzle against enclosure from any direction (second digit
5).
Prevention from electrical shock
Make sure to ground (earth) the fixture electrically. (It’s essential to connect the yellow/green conductor to earth)
Main Connection
Do not apply any AC mains power to the fixture at any other voltage than that specified.
Rigging
Check that all external covers and rigging hardware are securely fastened.
When choosing the installation-location, please make sure that the fixture is not exposed to extreme heat. There should not be any
cables lying around. You endanger your own and the safety of others.
Make sure that the area below the installation place is cordoned off when rigging, de-rigging or servicing the fixture.
If suspending from a rigging structure, fasten the fixture to a rigging clamp with M10 bolts screwed into the threaded hole in the
center of the brackets of the fixture.
Make sure all fixtures are operated and installed by qualified personnel with the relevant national certifications.
Install, as described in this manual, a secondary attachment such as a safety wire that is approved by an official body.