EHP IoT Box, Technical Manual, Page: 25 / 31

The Net-Scale protocol requires that the scale and channel numbers match. You can only receive data
from a scale if both values of the scale are identical with the call-up commands of the Net-Scale.
►
Press the TEST key of the crane scale, the most important setting parameters are now
displayed one after the other. Value 4 and value 5 are relevant.
Table 4 - TEST Display values
To change the scales and channel number, proceed as follows:
Press the On and Test keys simultaneously, EEEEE appears in
the display.
Press the Test key repeatedly until P13 (frequency channel)
appears in the display.