
Depending on the installation location of the IoT Box, different cable lengths are required. Therefore,
only the connector for the power connection - Neutrik Powercon NAC3FCA - and the connector for the
network connection - Neutrik Ethercon NE8MX - are included in the scope of delivery.
(A)
Slide the clamping sleeve (1) and
the collet (2) over the cable.
(B)
Prepare the power cable according
to the dimensions in the illustration.
(C)
Insert the cable into the provided
clamps and fasten it (max. torque
0.5Nm).
Finally,
screw
the
connector
housing and clamping sleeve
together.
Summary of Contents for IoT Box
