
The basic structure of the UDP file is structured in the following sections:
FehlerCodes
Error Codes
GewichtRegistrierenBeiStillstand
Weight Registered at Standstill
FirmwareversionAbfragen
Firmware request
MesswertAbfrage
Weighing value request
MesswertAbfragenEinmalig
Weighing value unique request
PhysikalischeEingänge
Physical Inputs
Automatic error detection routines cyclically check the functions of the crane scale and ensure a
proper operation. If an error is detected, it is automatically indicated on the display in the form of an
error code. The balance switches off automatically after approx. 5 seconds.
The input voltage of the
measuring amplifier is too
low.
Switch scale off and on
again to see if Error is
detected again.
Contact your EHP
Service partner for
further information.
The input voltage of the
measuring amplifier is too
high.
AD- Converter error
Error radio modem
An incorrect radio
channel was set or the
modem is defect.
Summary of Contents for IoT Box
