
Using the predefined GSDML & UDT files, you can integrate the IoT Box into your PLC network in just
a few steps. You can obtain the files from your EHP contact.
The following describes the integration of the relevant information in the widely used TIA Portal (TIA
Portal is not part of the IoT Box scope of delivery).
The IoT-Box can also be integrated via STEP 7 Classic or in other control systems (e.g. BoschRexroth).
If you have any questions, please contact your EHP representative.
(A)
Under the "Extras" menu tab, select
"Manage device description file
(GSD)".
Select the source path under which
the GSDML file of the IoT Box can be
found on your computer.
Highlight the file and click Install.
(B)
Search for "EHP" in the "Hardware
Catalog", select "EHP_IoT Box" and
drag it to your network view.
(C)
Finally, you only need to establish
the connection between your PLC
and the IoT Box.
Summary of Contents for IoT Box
