manualshive.com logo in svg

EGO Flash, Operating Manual, Page: 46 / 53

Share
Download
EGO Flash Operating Manual Download Page 46

Spares parts and accessories

10 

You can find out more about supported mobile phones on our website at www.fwd-online.de. Your dealer will also be happy to advi-

se you if you have any questions.

Accessories:
Stereo Mute Box

Relax and listen to music or phone from your car. The Stereo Mute 

Box provides smart sound management. This compact box plays your calls or 

music over the car‘s speakers – of course in superb stereo sound. The car radio 

is muted during calls or when listening to music.

Features:
-  Radio muting during calls or music playback (Audio Streaming)
-  Stereo music reproduction in combination with the car‘s front speakers 
-  Phone audio over the front speakers 

Base plate with charging cradle

The charging cradle is a practical accessory for Bluetooth

®

 hands-free systems by 

Funkwerk Dabendorf. The charging cradle holds your mobile phone firmly and allows 

you to recharge its batteries in your car and is an ideal accessory for drivers who are 

constantly on the road and often need their phones. In addition, the external antenna 

connection ensures outstanding reception and transmission.

Features:
-  Intelligent charging circuit for mobile phones
-  Mobile phone safely and securely held in the charging cradle
-  External antenna connection for excellent call quality

EGO iDapter

The EGO iDapter allows convenient integration of your iPod

TM

 into the 

vehicle. You thus always have your favorite music with you and can 

charge the battery of the iPod

TM

 at the same time.

EGO FLASH

Summary of Contents for Flash






















































Reviews:

No comments