manualshive.com logo in svg

EGO Flash, Operating Manual, Page: 13 / 53

Share
Download
EGO Flash Operating Manual Download Page 13

12 

|

 

13

6.3   Installation

DAMAGE TO ESSENTIAL VEHICLE COMPONENTS!

 Essential vehicle components or wiring can be damaged when drilling mounting 

holes or screwing in self-threading screws. Please make sure there is always sufficient space behind the screw holes and drilled 
holes!

6.3.1  Mounting the electronics box

Installation consoles for a number of car models are 
available from your dealer. These are designed to con-
tain all the system components, including the electronics 
box. When it is not possible to use an installation console, 
please proceed as follows:

Define the mounting points

Making sure that there is at least 2.8 in space for the plug 

and socket connectors. Mark the positions for the fixing 

screws.

Mounting the electronics box

For mounting the electronics box, use four self-threading screws and appropriate washers. We recommend size “ST 2,9x25 DIN 

7981” self-threading screws. These are ideal for the fixing of the electronics box. Pre-drill the holes with a 0.08 in drill. 

6.3.2  Mounting the microphone

Define the mounting location

The microphone holder has a self-adhesive strip on the back. The mounting location should have the same form and area as the 

self-adhesive strip on the microphone holder. The location selected must allow the microphone cable to reach the electronics box! 

Position the microphone with the head facing towards the direction of speech.

Cleaning and degreasing the mounting location

The mounting location must be clean and free from grease and dirt/dust. Prior to installation, clean the area with a cleansing pro-

duct containing ethyl alcohol. Only use products that do not damage plastics or varnished wood finishes and are themselves free of 

oils or grease. Unsuitable cleansers are, for example, lighter fluid, acetone, turpentine, trichloroethylene and similar products.

Attaching the microphone holder

Peel off the protective backing from the self-adhesive strip. Hold the microphone holder at a distance of several millimetres (about 

a quarter of an inch) above the desired mounting location. Re-check the positioning. Re-positioning after mounting is no longer 

possible. Place the microphone holder on the mounting location and fix by applying short and light pressure.

Fig. 05:

Electronics box 

dimensions

Summary of Contents for Flash






















































Reviews:

No comments