EGO Flash Operating Manual Download Page 43 | Manualshive

Page: 43 / 53

EGO Flash Operating Manual Download Page 43

42

|

43

Service

9

(FAQ) – A list of frequently asked questions:

1. Is it possible to dial directly (without voice control) with the EGO unit?

Yes, with all EGO units except EGO TALK, under the menu item “Contacts list / Options / Direct outward dialing”.

2. What are the exact dimensions of the EGO FLASH components?

You can find the dimensions in the operating instructions under the “Technical data” section.

3. Are EGO units suitable for all types of vehicles?

Yes, EGO units are suitable for all types of vehicles. See installation instructions!

4. Is there a list of optional charging cradles?

Yes. A list of optional cradles is available on our website.

5. Are software updates for the units free?

Yes.

6. Where can EGO be purchased?

From authorized specialty dealers. You can find a specialty dealer in your area through our website under the link Dealers →

Dealer search.

7. What is the procedure for transferring data in order to playback music?

With the EGO FLASH, music can be transferred via Bluetooth

®

(A2DP), via the EGO iDapter and also via the line in. It is

possible to make an MP3 player and iPod™ Bluetooth

®

-capable with a dongle/adapter. If an MP3 player without A2DP is used,

a jack cable can be used to connect it to the EGO FLASH.

8. Do EGO units have an external antenna port?

In combination with the optional charging cradle and the associated base plate, the mobile phone can be connected to the

external antenna port.

«
...
41
42
43
44
45
...
»

Summary of Contents for Flash






















































Reviews:

No comments