manualshive.com logo in svg

EGO Flash, Operating Manual, Page: 11 / 53

Share
Download
EGO Flash Operating Manual Download Page 11

10 

|

 

11

6.1.5  Add-on speakers / Car audio telephone connection

The car’s loudspeakers are transferred to the system is by means of switch contacts. These are designed for a peak power hand-

ling of 35 W (Sinus). Loudspeaker power handling exceeding 35 W leads to premature wear on the switching contacts. For higher 

outputs, use the telephone connection of the car audio or a 5 W / 4-Ohm satellite speaker. This port is only designed for voice 

reproduction.

6.1.6  Car audio line-in input

A car audio with a line-in input option is required for music reproduction in stereo. As an alternative to line-in, the car audio may 

have a mini-ISO port (block connector C), a 0.14 in jack socket or a RCA input socket. An appropriate adapter lead is required for 

the connection between the EGO FLASH line-out and the line-in version of your audio system. If your car audio system has no 

line-in option, you can employ the optionally available Stereo Mute Box for stereo reproduction in combination with your car’s front 

speakers.

6.2   Installation locations

INSTALLATION LOCATIONS!

 

Unsuitable installation locations may become a source of injury in an accident (or emergency braking) 

situation, or may inhibit the correct functioning of essential safety equipment!

6.2.1  Checking cable lengths

Before you’ve securely installed the components, check that the installation locations have been selected in such a way that the 

cable length is sufficient to connect the individual components.

6.2.2  Selection of the installation location for the electronics box

The Bluetooth

®

 antenna for the connection to the mobile phone is 

installed in the electronics box. The antenna transmits directionally 

towards the front. For this reason, during installation, ensure that the 

antenna faces into the passenger cell (see Fig. 02). Vertical mounting 

is ideal. Metallic screening between the front panel and the passenger 

cell, such as metal or metallised plastic panels, are unsuitable and may 

interfere with the Bluetooth

®

 connection. Locations behind the dash-

board or in a metal-lined glove compartment are also unsuitable.

A covering in plastic, fabric or wood presents no problems whatsoever.

Fig. 02:

Signal transmissi-

on of the Blu-

etooth

®

 antenna

Summary of Contents for Flash






















































Reviews:

No comments