Name
Type
Content
rega4
char[128]
Alphanumeric register free usage
reset_req
bool
Reboot required
sensor_rate
uint16
Sensor query-rate in seconds
snmp_ena
check
SNMP activated
snmp_port
uint16
SNMP agent's port
snmp_wrprot
check
SNMP is read-only
snmpd
char[]
SNMP server's host name or IP address
support_tpl_options
bool
Always 1 for firmware that supports the template command
option
syscontact
char[63]
Content of SNMP OID 1.3.6.1.2.1.1.4
sysdate
date
Current date (local)
sysgmdate
date
Current date (UTC)
sysgmtime
time
Current time (UTC)
syslocation
char[63]
Content of SNMP OID 1.3.6.1.2.1.1.6
syslog
char[31]
Syslog server's host name or IP address
systime
time
Current time (local)
systimestamp
ts
Time stamp of current local time
timezone
char[]
Time zone in hours and minutes
trap_ena
bool
SNMP traps activated
tz_bias
int32
Difference between selected time zone and UTC in seconds
tz_idx
int32
Index of selected time zone
uptime
uint32
Time since boot in days, hours, minutes and seconds
uptime_d
char[]
Full days since last boot
uptime_h
char[]
Hours past full days since last boot
uptime_m
char[]
Minutes past full hours since last boot
uptime_s
char[]
Seconds past full minute since last boot
wlan_dis
bool
WiFI deactivated
wlan_name
char[]
Name of WiFi network (SSID)
wlan_pass
char[]
Passphrase for Wifi network
wlan_secu
int32
Security of WiFi network
0: Unknown
1: WEP-OPEN
2: WEP-PSK
3: WEP-SHARED
4: WPA-PSK-TKIP
5: WPA-PSK-AES
6: WPA2-PSK-AES
7: WPA2-PSK-TKIP
8: WPA2-PSK-MIXED
Table actiontab
The
actiontab
table contains the configured actions. The variables
actiontab_type
and
actiontab_event_type
define the type of action and event. The meaning of
other variables depends on these two variables.
88