5.
Insert the core into the terminal.
6.
Tighten the screw by turning it clockwise.
7.
Make sure that the core is securely fixed by pulling it with a little force.
Connecting a Sensor to Spring-loaded Terminals
You will require the following tools, in order to connect a sensor:
A tool with a fine tip, e.g. a fine screwdriver or a pair of tweezers
A ballpoint pen
Possibly a magnifying glass
Two DIP switches located above the terminals for the cable cores are used to
select whether the sensor is connected to Querx PT using two, three or four cable
cores.
2-wire sensor
3-wire sensor
4-wire sensor
20