EGi Geodesic Photogrammetry System User Manual Download Page 20

Page: 20 / 98

GPS 3 User Manual | 8103002-56

•

2018-07-17

•

Maintain patient isolation within patient environment.

Never

simultaneously touch the patient and any component outside of the patient
area and never let patients touch any component, other than the Net that is
being worn, inside or outside of the patient area.

1.4.3

Moving Warnings

WARNING:

The GPS weighs 100 kg (220 lb.).

•

Tipping hazards.

•

Use caution when moving the GPS and do not tip the GPS more
than 10 degrees in any direction. Physical injury or equipment
damage may result.

•

Only move the GPS:

•

By pushing it forward from behind the gantry.

•

With the upper gantry and dome (if attached) completely
lowered.

Summary of Contents for Geodesic Photogrammetry System



































































































Search results

Summary of Contents for Geodesic Photogrammetry System

Reviews:

Related manuals for Geodesic Photogrammetry System

Brands by name

Popular brands

EGi Geodesic Photogrammetry System, User Manual

Search results

Summary of Contents for Geodesic Photogrammetry System

Reviews:

Related manuals for Geodesic Photogrammetry System

Brands by name

Popular brands