![background image](http://html1.mh-extra.com/html/efka/ab320a5200/ab320a5200_manual_2367395059.webp)
EFKA AB320A5200
61
Technician Level
Code no. 190 with control operation
Code no. 1907 with control panel operation
Parameter
Designation
Unit
max
min
Preset
Ind.
133
LSE
Thread trimming operation, when completing the seam
1
0
1 *)
A
after light barrier sensing On/Off
134
SSt
Softstart On/Off
1
0
0
*)
A
135
SrS
Ornamental backtack On/Off
1
0
0
A
136
FAr
Trimming stitch backward On/Off
1
0
0
A
137
hP
High lift for walking foot On/Off
1
0
A
139
nIS
Display of machine speed On/Off
1
0
0
*)
A
141
SGn
Speed status for the seam with stitch counting
4
0
0
A
0 = Speed controllable by the pedal up to the set
maximum speed (parameter 111)
1 = Fixed speed (parameter 118) without influence by
the pedal (machine stop by pressing the pedal
to the basic position)
2 = Limited speed controllable by the pedal up to the
set limit (parameter 118)
3 = At fixed speed (parameter 118) can be interrupted
by full heelback
4 = At fixed speed (parameter 110) can be interrupted
by full heelback.
142
SFn
Speed status for the free seam and for the seam with
3
0
0
A
light barrier
0 = Speed controllable by the pedal up to the set
maximum speed (parameter 111)
1 = Fixed speed (parameter 118) without influence by
the pedal (machine stop by pressing the pedal
to the basic position)
2 = Limited speed controllable by the pedal up to the
set limit (parameter 118)
3 = At fixed speed (parameter 118) can be interrupted
by full heelback (only for seams with light barrier).
143
kSA
Stitch counting at the start of the seam (e. g. chain
3
0
1
A
suction
0 = Speed controllable by the pedal up to the set
maximum speed (parameter 111)
1 = Fixed speed (parameter 112) without influence by
the pedal (machine stop by pressing the pedal
to the basic position)
2 = Limited speed controllable by the pedal up to the
set limit (parameter 112)
3 = At fixed speed (parameter 112), can be suspended
or interrupted depending on the setting of
parameter 019.
144
kSE
Stitch counting at the seam end (e. g. chain suction)
3
0
1
A
0 = Speed controllable by the pedal up to the set
maximum speed (parameter 111)
1 = Fixed speed (parameter 113) without influence by
the pedal (machine stop by pressing the pedal
to the basic position)
2 = Limited speed controllable by the pedal up to the
set limit (parameter 113)
3 = At fixed speed (parameter 113), can be suspended
or interrupted depending on the setting of
parameter 019.
*)
Depending on the selected mode. See table at the beginning of the List of Parameters!
**)
When programming the 3-digit or 4-digit control parameter values (without control panel), the 2-digit or 3-digit
value displayed must be multiplied by 10.