EFKA AB320A5200
7
3 Setting and Putting into Service with the Aid of the Fast Installation
Routine (SIR)
The Fast Installation Routine (SIR) passes through all parameters necessary for programming the functional sequence and
the positions.
Input parameter 500
Parameter for functional sequence “thread trimming operations”
Parameter for direction of motor rotation
Parameter for transmission ratio
Important!
The transmission ratio should be
determined and indicated as precisely as possible.
Parameter for type of position sensor
Parameter for position 1
Parameter for position 2
The values can be varied by pressing the +/- keys. When the parameter is displayed on the V810 control panel, press
the E key once more for the value to be displayed.
Exit the routine any time by pressing the
P
key once, and select a new parameter. Exit programming by pressing the
P
key
twice, and the drive is ready for a new sewing operation.
See instruction manual for details!
F-272
End SIR
F-451
F-453
F-270
No
P
E
E
E
E
Yes
K L2 4 3 8 a
F-161
F-290
F-500
Code 3112
F-200
E
E
>>
E
E