![background image](http://html1.mh-extra.com/html/efka/ab320a5200/ab320a5200_manual_2367395011.webp)
EFKA AB320A5200
13
4.4 Connection of a Sewing Light with Transformer
"
Switch off the control and remove mains plug from outlet
"
Unscrew the control unit from the machine table
"
Loosen 4 screws (
A
)
"
Remove the mounting plate
"
Loosen 2 screws (
B
) each at the front and at the rear
"
Open the left part of the housing
"
Pull the sewing light cable through the cable bushing
"
Area (
C
): Connect strands with clamp on the printed circuit board
"
Insert earth lead into plug-in device on the housing part
"
Close and screw-connect the housing
"
Mount the control unit on the machine table
CAUTION!
When the sewing light is connected, it is always current-carrying (230V), even if
the control unit is switched off! Only one sewing light with transformer can be
connected to the control unit!
A
B
C
-
>>
+
P
E
K L2 3 9 9
0
I
ATTENTION!
B
efore opening the cover, turn power off!