EFI Fiery EX700i, Configuration And Setup

Page: 57 / 65

A
DMINISTERING THE
F
IERY
C
ONTROLLER
57
Starting, shutting down, rebooting, and restarting the EX700i
This section describes how to start, shut down, reboot, and restart the EX700i
when necessary.
T
O START THE
EX700
I
P
RINT
S
ERVER
1 Make sure that the power cable is attached and that the power switch (if present) is in the
ON position.
2 Press the power button on the front panel.
3 Check the Activity light on the EX700i Print Server.
T
O START THE
I
NTEGRATED
F
IERY
C
OLOR
S
ERVER
1 Make sure that the power switch on the Integrated Fiery Color Server back panel is set to ON
(|), and then press the power button once to power on the Integrated Fiery Color Serveri.
2 Wait approximately 1 minute as the Integrated Fiery Color Server completes the startup
sequence.
3 After the Integrated Fiery Color Server LED display reaches and remains at 00, power on the
digital press using the main power switch on the front of the digital press.
T
O SHUT DOWN
,
RESTART
,
OR REBOOT THE
EX700
I FROM THE DIGITAL PRESS TOUCH PANEL
1 Press Services on the digital press.
2 On the digital press touch panel, press Web Applications.
3 Press the Info tab and press Restart Server.
4 Enter logon information, if prompted.
5 Select Reboot System, Restart Server, or Shut Down System.
Wait for the EX700i to shut down, reboot, or restart.