EFI Fiery EX700i, Configuration And Setup

Page: 29 / 65

S
ETTING UP THE
C
OPIER
T
OUCH
P
ANEL
29
Ethernet Speed
Auto, 10 Mbps, 100 Mbps, 10FD, 100FD
Choose the appropriate speed of the network. Choose Auto in any of these cases:
• The network speed is unknown.
• The network environment is mixed.
• The network uses 1Gbps.
IPv4 Address Type
Automatic, Manual
Choose whether to allow the EX700i to obtain its Ethernet IP address automatically by
searching the network.
IP Address
127.0.0.1
If you choose Manual, enter the EX700i IP address for Ethernet. This IP address, unlike an IP
address set automatically, remains the same if you restart the EX700i. You must change the
default to a valid address for your network.
Subnet Mask
255.255.255.0
Set the subnet mask for printing with TCP/IP on your network.
Confirm the subnet mask setting with your network administrator before proceeding.
Gateway Type
Automatic, Manual
Choose the method for obtaining the gateway address for printing with TCP/IP.
Gateway Address
127.0.0.1
If you answered Manual to the previous option, set the gateway address for printing with
TCP/IP on your network.
Enable Web Services
On, Off
Select On to make WebTools available to users. TCP/IP must be enabled on the EX700i and
user workstations. A Java-enabled Web browser and a valid IP address or DNS host name are
required for each user computer.