EFI Fiery EX700i, Configuration And Setup

Page: 27 / 65

S
ETTING UP THE
C
OPIER
T
OUCH
P
ANEL
27
Info tab
The Info tab contains the Server and Print Pages tabs, which allow you to view and print
information about the EX700i.
Server tab
From the Info tab > Server tab you can view the EX700i Server name, IP address, Version,
Fiery system software version, hard drive usage, amount of installed memory, and the EX700i
installed options. You can also access the following command:
Print Pages tab
From the Info tab > Print Pages tab you can print the following system pages and activity logs.
Scan tab
Restart Server Allows you to restart, reboot, or shut down the EX700i. For more information, see page 57 .
PS/PCL Test Page:
Allows you to confirm that the EX700i is properly connected to the
digital press, and provides color and grayscale samples to troubleshoot problems with the
digital press or the EX700i. Settings on the Test Page may include: Server Name, color
settings, printer model, and date and time the Test Page was printed.
Configuration:
Prints the Configuration page, which gives the current server and device
configuration. This page lists general information about the hardware and software
configuration of the EX700i, the current options for all Setup settings, information about
the current calibration, and the IP address of the EX700i.
Color Charts:
Prints samples of the RGB, CMY, and PANTONE colors available from the
EX700i.
PS/PCL Font List:
Prints a list of all fonts currently on the EX700i hard disk.
Job Log:
Prints a log of the last 55 jobs.
E-mail Log:
Prints a log of recent e-mail activity that is useful to the network administrator.
FTP Log:
Prints a log of recent FTP activity that is useful to the network administrator.
N
OTE
: To print the E-mail Log, you must first enable the appropriate service. For E-mail
Services, see Configure Help.
The Scan tab allows you to create, edit, and delete job templates for scanning. For more
information about using this function, see
Utilities .