EFI Fiery ES IC-418, Configuration And Setup, Page: 77 / 243

4
Select
Printer Delete Utility
.
Any Fiery ES printer drivers found on your computer are listed.
Note:
All printer drivers installed on your computer are listed.
5
Do one of the following:
•
To delete a printer, select the check box next to the printer name and click
Delete the Selected Printers
.
•
To delete all of the installed printer drivers, select the
Delete All Printer Drivers
check box, and click
OK
.
6
When you finish deleting printer drivers, click
Exit
.
Setting up Windows computers for printing
After the printer driver is installed on the Windows client computer, you need to configure the proper connection
for your networked Fiery ES printer.
To print from Windows computers, you or the administrator must perform the following tasks to set up a
connection:
•
Set up network servers, if any.
•
Set up the Fiery ES to accept print jobs from your computer.
•
Configure a port on each Windows computer for the network type.
Setting up printing connections on Windows client computers
The print connections must be set up on the Windows client computers.
The Fiery ES supports the following printing connections:
•
SMB
•
Standard TCP/IP (RAW or LPR)
Printing
Windows for Fiery ES
17