manualshive.com logo in svg

EFI Fiery ES IC-418, Configuration And Setup, Page: 31 / 243

Share
Download
EFI Fiery ES IC-418 Configuration And Setup Download Page 31

5

Select the backup time.

6

Follow the on-screen prompts to complete the backup.

Restore the Fiery ES system using Fiery System Restore

Important: 

If the hard disk is not booting, the system must be restored from a bootable backup. If it

becomes necessary to restore the Fiery ES from a bootable image, contact your service technician.

Important: 

Before you restore the Fiery ES, we recommend that you contact technical support to confirm

the necessity of restoring.

Important: 

This procedure overwrites all data, customizations, and software updates implemented on the

Fiery ES since the customized backup image was created. It also overwrites any backup image that is stored

locally. If you restore from a factory default image, all data is lost.

Important: 

A customized image can only be restored to the same Fiery ES unit from which it was created.

1

If applicable, attach the external hard drive or USB containing the image to the Fiery ES.

2

On the 

Home

 tab in WebTools, select 

Restore

 under 

Fiery System Restore

.

3

Follow the on-screen prompts to complete the restore.

4

Optional: After restoring the Fiery ES, run 

System Updates

 to ensure the latest Fiery ES software version is

installed, or request the service technician to install the patches.

5

Optional: If a backup of the configuration settings is available, restore the configuration settings as described

in this document.
This can be useful if the configuration backup is more current than the system image backup (such as if you

restored from factory default), or if the configuration backup included the job log and VDP/FreeForm

resources.

Backing up and restoring the Fiery ES configuration settings

You can back up and restore the Fiery ES configuration settings as a separate file from the system image. You can

restore the configuration settings file if you want to reapply the custom settings after reinstalling or upgrading

system software.
The configuration settings backup file can be applied to any Fiery ES unit that has the same version of Fiery ES

software installed (the client software utilities version does not matter). To determine the Fiery ES software version,

view the configuration summary in Configure.
You can back up and restore the configuration settings through Configure or Command WorkStation, both of which

provide the same options for which settings to back up. This document describes the Configure feature. For

information about the Command WorkStation feature, see 

Command WorkStation Help

.

Configuration and Setup

Administration

31

Summary of Contents for Fiery ES IC-418




















































































































































































































































Reviews:

No comments